Registering the IoE Module with LI-COR Cloud

The procedure for registering with LI-COR Cloud can be undertaken at any time - before or after connecting sensors, either in an office or in the field.

Your IoE Module is ready to connect with a cellular provider; it will connect automatically when powered on. Signal strength and network status are given on the display.

Creating an account

You can use a computer or mobile device to complete the registration. Internet access and a valid email address are required. To create your account:

  1. Go to LI-COR Cloud at www.licor.cloud and click Register Account.

    Fill in the form and accept the terms and conditions. You must provide a unique username and organization name.

  2. Confirm your account.

    Check your email (possibly the spam folder) for a verification message. Follow the instructions in the message to activate your account.

  3. Log in.

    After registering and logging in, select Water - IoE Enabled Evapotranspiration.

Adding the IoE-Enabled node to LI-COR Cloud

Devices can be added after you are logged in.

  1. Click IoE-Enabled Nodes ().

  2. Click Register Node.

    Assign a Node Name - something that will help you distinguish this device from others.

    The device interface allows you to name a IoE Module and enter the ID to connet.

  3. Power on the IoE module and allow it to start up.

  4. Enter the IoE Module Serial Number from the label in the upper right corner of the box, or scan the QR code.

    The client ID is given under the about screen.

  5. Click or tap Add to register the IoE-enabled node with LI-COR Cloud.

    The node will begin uploading measurement data (messages) on the programmed schedule.

It may take 30 minutes or more before the first messages are uploaded to LI-COR Cloud.

Viewing the device online

Viewing data from a water node is straight forward. An account is required, and you must have permission to view the device.

  1. Log in to your LI-COR Cloud account.

  2. Select the Water node (IoE enabled evapotranspiration).

    You'll see a table of devices that you administer and groups that include you.

    LI-COR Cloud home page displays nodes and groups.

  3. Click Dashboard to view information about the node.

    Nodes are displayed

  4. Scroll down to view plots of data.

  5. Select a sensor to view data from that sensor.

  6. Click Nodes to view more options.

  • + Register Node: Add another node.
  • Edit Node: Change the Name, Shared with, data download settings, and ownership.
  • Node Dashboard: View a map and data from the node and its sensors.
  • Share Node: Give permission to individuals or groups.

Features of LI-COR Cloud are described in licor.com/Cloud-support.