All Documents

Posters, tech tips, and other documents that describe the LI-7825.

Summary
Using the LI-Integrator app The LI-Integrator app is a simple Windows application that can compute area under the curve with data from LI-COR analyzers, including the LI-8xx series and LI-78xx series analyzers. application note
Monitoring and downloading data from your Trace Gas Analyzer remotely An overview of settings used to remotely monitor and download data from a Trace Gas Analyzer application note
Mobile measurement of fugitive gas emissions Application note describing techniques to collect and visualize methane concentration data associated with either multiple fixed locations or while walking/driving application note
Measuring gas concentrations of small air samples with LI-COR Trace Gas Analyzers This application note describes how to determine the CH4, CO2, or N2O gas concentration in small samples. application note
Replacing the pump Instructions for installing a replacement pump in the LI-78xx series Trace Gas Analyzers install guide
LI-7825 CO2 Isotopes /NH3 Trace Gas Analyzer Instruction Manual Instruction manual for the LI-7825. manual
Avoiding water ingress in LI-COR Trace Gas Analyzers This note describes several ways to prevent drawing water into the trace gas analyzer air inlet. technical note
Using the reduced flow rate kit 7800-113 Describes how to install the reduced flow rate kit, which can reduce the nominal flow rate from 250 sccm to about 70 sccm (firmware versions 2.0.25 and newer). technical note
Dealing with Daylight Saving Time This tip advises on the use of daylight saving time with LI-COR products. tech tip
Specifications Sheet Performance specifications for the instrument. specs sheet