Software Downloads

Here you'll find embedded software, interface software, SoilFluxPro Software, and mobile apps for the LI-8100A.

The Windows Interface software and embedded software versions must be compatible. The current version of the LI-8100A software is version 4.0.9 for embedded software, and version 4.0.9 for Windows Interface software. This version also allows connection with the iOS and Android apps (details below). For PALM connection, version 3.0.1 embedded software is required.

Thanks for your request

Contact us at envsupport@licor.com if you are unable complete your request.

Smart Chamber Embedded Software

We are unable to display the form due to your browser’s privacy settings. Please use a different browser or adjust your browser’s privacy settings. If you need further assistance, please contact us.

LI-8250 Embedded Firmware

We are unable to display the form due to your browser’s privacy settings. Please use a different browser or adjust your browser’s privacy settings. If you need further assistance, please contact us.

LI-8100A PC and Embedded Software

We are unable to display the form due to your browser’s privacy settings. Please use a different browser or adjust your browser’s privacy settings. If you need further assistance, please contact us.

SoilFluxPro Software

We are unable to display the form due to your browser’s privacy settings. Please use a different browser or adjust your browser’s privacy settings. If you need further assistance, please contact us.

LI-8100/A Windows Mobile and Palm Software

We are unable to display the form due to your browser’s privacy settings. Please use a different browser or adjust your browser’s privacy settings. If you need further assistance, please contact us.

Embedded

LI-8100A Instrument (Embedded) Software v4.0.9. This software is required for use with the 8100-405 CO2 Mapping Kit.

(LI8100_emb-4.0.9.zip)

** CURRENT VERSION ** This is the LI-8100A Instrument (Embedded) Software. This software is required for use with the 8100-405 CO2 Mapping Kit. When updating, be sure to update the Windows Interface software as well. See the change log for details. The update must be performed with an RS-232 serial connection, as described in the update instructions.

Interface

LI-8100A Windows application software for use with Windows-based PCs. v4.0.9.

(LI8100_win-4.0.9_setup.exe)

** CURRENT VERSION ** For use with Windows-based PCs. Includes exclusive LI-8100A Data Analysis Software. When updating, be sure to update the Instrument (Embedded) software as well. See the change log for details.

SoilFluxPro Software

SoilFluxPro Software v5.3 for Windows

(SoiFluxPro-5.3.1.exe)

SoilFluxPro™ Software v5 for Windows.

SoilFluxPro Software v5.3 for macOS

(SoiFluxPro-5.3.1.dmg)

SoilFluxPro™ Software v5 for macOS (64-bit).

Mobile Device Apps

Notice: Please read the following updates regarding the compatibility of the LI-8100App with mobile devices.

  • Apple devices: Compatible with iOS versions 4.0 to 14.8. Not compatible with iOS versions newer than 14.8.
  • Android devices: Compatible with devices with ARMv7 CPU architecture. Not compatible with CPU architectures common to newer devices.

You can continue to use the LI-8100A with a computer or tablet that is connected directly to the LI-8100A Analyzer Control Unit with an Ethernet cable or over a wireless network. You also can continue to use the LI-8100App on any older iOS or Android device that has a compatible operating system and architecture.

The LI-8100APP for iPhone, iPad, or iPod Touch.

(LI-8100APP for Apple.webarchive)

** CURRENT VERSION ** The LI-8100APP enables LI-8100A remote control via iPhone, iPad, or iPod Touch. Uses Wi-Fi for local connection to any LI-8100A with (embedded) software v4.0.0 or above and an installed wireless PCMCIA (PC) card.

The LI-8100App for Android devices.

(LI-8100APP for Android.webarchive)

** CURRENT VERSION ** The LI-8100App enables LI-8100A remote control via Android devices. Uses Wi-Fi for local connection to any LI-8100A with (embedded) software v4.0.0 or above and an installed wireless access point device.

Other Software

8100Sync Application

(8100sync2.0.zip)

Synchronizes the LI-8100A clock with the gas analyzer clock when the LI-8100A is used with third-party analyzers that run the Windows operating system.

8100-104 Chamber Control Kit Example Programs

These two example control programs demonstrate how to control an 8100-104/C using two different commonly available hardware platforms, as described in document ACU-123, 8100-104 Chamber Control Kit.

LI-8100A Windows application software for use with Windows-based PCs. v2.0.0

Previous version software installer. For use with Windows-based PCs. Version 2.0.0. When updating, be sure to update the instrument (embedded) software as well.

LI-8100A Windows application software for use with Windows-based PCs. v3.0.1

Previous version software installer. For use with Windows-based PCs. Includes exclusive LI-8100A Data Analysis Software. When updating, be sure to update the instrument (embedded) software as well.

LI-8100A Instrument (Embedded) Software v2.0.0. This software is required for use with Palm mobile devices that are running V1.0.6 software.

Previous version software installer. This is the LI-8100 Instrument (embedded) software, version 2.0.0. When updating, be sure to update the Windows Interface Software as well.

LI-8100A Instrument (Embedded) Software v3.0.1. This software is required for use with Palm mobile devices.

Previous version software installer. This is the LI-8100A Instrument (Embedded) Software, version 3.0.1. This version is required for Palm users. When updating, be sure to update the Windows Interface Software as well.

Windows mobile application v4.0.0 for controlling the LI-8100A with a compatible mobile device

** CURRENT VERSION ** For use with Windows Mobile devices. Uses Wi-Fi for local connection to any LI-8100A with (embedded) software V3.0.0 or above and an installed wireless PCMCIA (PC) card.

Windows mobile application v1.0.0 for controlling the LI-8100A with a compatible mobile device

Previous version software installer. For use with Windows Mobile devices. Version 1.0.0.

Palm mobile application v1.0.6 for controlling the LI-8100

Can be used with the Palm Tungsten C, Life Drive, and TX PDAs for serial or wireless communication. Other Palm PDAs can be used with serial communication only. Please consult LI-COR for further details. Compatibility: For use with Version 2.x software.

Palm mobile application v3.0 for controlling the LI-8100

Can be used with the Palm Tungsten C, Life Drive, and TX PDAs for serial or wireless communication. Other Palm PDAs can be used with serial communication only. Compatibility: For use with Version 3.x software.